Hash board for Antminer T17+

Technical specifications of the Antminer T17 Plus hash board:


Chip type: BM1397AG;


Chip technology: 7 nm;


Number of chips: 44;


Algorithm: SHA-256;


Operating frequency: 600 MHz;


Hash rate: 19.3TH/s;


Chip power: 960 W;


Voltage: 17-21 Volts.

Hash board for Antminer T17+

When might you need to replace the hash board? If the ASIC is operating without a hash rate and the temperature on one of the boards exceeds 80 degrees. The cause may be a radiator failure, so you need to find the chip and replace it with a new one. If this does not help, you will need to install a new component. If the device is constantly operating at temperatures above 80 degrees, it is worth using additional cooling devices for increased protection.

Repairs may also be necessary if the hash rate is normal but there is no timeline. You need to test 3 boards on one controller to determine which one needs to be replaced. The cause of the malfunction may be damage to the detector. If the technician can fix some of the malfunctions on the board, then in the case of Xs appearing and a decrease in speed, a complete replacement will be necessary. The cause of the malfunction is the failure of several chips. It is also worth contacting the service if the ASIC status is displayed as negative on one of the boards. Unstable voltage often leads to the replacement of the power supply and the 18-pin cable. Where to buy a hash board for Antminer T17+ in Kyiv? Place your order in our online store by adding the selected component to your cart. We offer fast delivery throughout Ukraine via Nova Poshta, as well as pickup for Kiev residents from our office. You can also use the services of our service department for ASIC repair.